Every backyard has the bits the mower can't reach. The strip where the couch grass runs over the path edge, the kikuyu creeping into the garden bed, the murraya that's gone shaggy on one side. Dragging out a full-size hedge trimmer for ten minutes of work is absurd, and hand shears take all afternoon. This cordless hedge trimmer is built for exactly that gap — one hand, two swappable blades, and you're done before the kettle boils.

Why It Stands Out

• 2 in 1 cutting system — a 100 mm grass shear blade for lawn edges and a 160 mm shrub blade for hedges. Swap them over in seconds and one pair of cordless garden shears becomes two tools
• Cordless rechargeable design — no lead to run out, no extension cord across the lawn, and nothing to unplug when you move to the front yard
• 2000mAh lithium battery — built in and included, so there's no separate battery pack to buy and no platform to get locked into
• Up to 60 minutes working time — more than enough for a full edge-and-tidy of an average block in one go
• Type-C charging socket — the same cable as your phone. Flat to full in about two hours, off any USB charger in the house
• Carbon steel blades — they cut through green growth cleanly rather than tearing at it, which is the difference between a hedge that looks trimmed and one that looks chewed
• Safety lock-off button — a deliberate two-step start, so it won't fire up in the shed or in your hand while you're repositioning
• Compact handheld body — one-handed, with a TPR anti-slip grip. Your other hand is free to hold a branch back or steady yourself on a step

Where to Use

• Lawn edges — along the driveway, the footpath and the garden bed line, where buffalo and kikuyu runners creep over the concrete. As a lawn edging tool it gives you the crisp line a mower can't
• Small shrubs and hedges — lilly pilly, murraya, box and westringia all take light shaping with the shrub blade. As a shrub trimmer it's built for maintenance, not for a once-a-year hack back
• Garden beds — trimming around plants, stones, edging and retaining walls where a big two-handed trimmer can't be aimed safely
• Planters and raised beds — close, controlled work at waist height, standing up, with one hand free
• Topiary and shaped plants — balls, cones and standards, where these work as powered topiary shears and save your wrists on a long session
• Anywhere hand shears are too slow — as electric hedge shears they do in five minutes what manual hedge shears take half an hour to do, without the blisters
• Quick garden touch-ups — the jobs you notice on the way to the car. Keep it charged by the back door and they take two minutes instead of never happening

What it isn't: this is a light-duty tool. It handles green growth and soft stems, not thick woody branches or a season's worth of overgrowth — use loppers or a full-size trimmer for those.

How It Works

1. The rechargeable battery powers the motor — once charged, the brushed motor drives the blade with no cord and no mains connection for the whole session.
2. The blade release system changes cutting modes — the grass shear blade goes on for edging, the shrub blade for hedges and shaping. No tools needed and nothing to lose.
3. The safety lock-off and on/off switch control operation — the lock-off has to be pressed before the switch will do anything, so starting the blades is always deliberate.

How to Use

1. Charge it fully first — use the included Type-C cable and give it a full charge before the first use. About two hours.
2. Pick your blade — grass shear blade for edging, shrub blade for hedges and shaping.
3. Fit the blade properly — seat it in the blade release system until it locks. A blade that isn't fully home is the usual cause of a stall.
4. Insert the safety key if your unit has one — check the manual that ships with the tool.
5. Take a firm grip — one hand on the handle, feet steady, and keep your free hand well clear of the blade path.
6. Press the lock-off, then the switch — the blades will not start on the switch alone.
7. Let the blade do the work — guide it slowly through the growth rather than pushing. Forcing it bogs the motor and tears the leaves instead of cutting them.
8. Switch off and clean before you put it away — sap and clippings set hard overnight and are far harder to get off in the morning.
Tip: for a straight lawn edge, run the shear blade along the hard surface and use the concrete or paver as your guide. Freehanding a long edge never looks straight.

Care and Maintenance

• Power off before touching the blades — switch it off and remove the safety key, if fitted, before cleaning or changing a blade
• Clean the blades after every use — wipe off clippings, sap and grit. Sap is the main reason blades start dragging, and it's much easier off while it's fresh
• Keep the motor housing dry — wipe it down, never hose it. Water in the housing kills the motor and isn't covered by anything
• Check the blade is seated before each use — ten seconds, and it prevents the most common failure with a swappable-blade tool
• A light oil on the blades helps — a wipe of machine oil after cleaning keeps rust off through a humid summer, especially near the coast
• Store it all together, dry — tool, both blades, cable and key in one spot out of the weather. Loose blades in a drawer get chipped and go blunt
• Charge it before it sits — lithium cells sit better part-charged than flat, so top it up before a long stretch without use

Specifications

What's Included

• 1 × Cordless hedge trimmer and grass shear tool
• 1 × Shrub blade (160 mm)
• 1 × Grass shear blade (100 mm)
• 1 × Type-C charging cable