Moving a hose across the yard or repositioning a single-nozzle sprinkler every few minutes turns lawn watering into a chore. This triple nozzle sprinkler skips that with a three-arm propeller that spins a full 360° on water pressure alone, covering a wide area from one spot. Each arm carries four nozzle ports set at different angles, and you can switch between straight and oblique spray to get either a focused stream or a wider, softer pattern.

Why It Stands Out

✓ Three-arm propeller — 3 arms with 4 nozzle ports each, spraying every direction from a single centre point for even coverage.

✓ Full 360° rotation — water pressure alone drives the spin, reaching every corner of the lawn without manual repositioning.

✓ 2 spray modes — straight spray for a direct, focused stream, or oblique spray for wider, gentler coverage.

✓ Links in series — connect multiple units with 3/4 in (10.16 cm) or 1-inch water pipe to cover larger areas from a single hose connection.

✓ Standard hose fitting — attaches to any standard garden hose connector, no special parts or tools required.

✓ Steady X-shaped base — sits flat on the lawn and holds the unit upright during operation, no staking needed.

Where It Fits Best

This sprinkler suits lawns, vegetable gardens, flower beds, and open yards that need regular, wide-area watering. It's a strong fit for rectangular or open layouts, where the 360° rotation gives consistent coverage without missed spots. For bigger properties, linking multiple units in series extends coverage past what a single sprinkler can reach. It performs best with moderate to strong water pressure from a standard outdoor tap.

How It Works

Connect the sprinkler to a garden hose through the standard connector at its base, and set the unit on a flat, level patch of lawn with the X-shaped base sitting evenly. Turning on the water starts the three-arm head rotating, driven by pressure through the central pivot. With four nozzle ports at different angles on each arm, the combination of rotation and multi-angle spray spreads water across the surrounding area. Switch between straight and oblique modes by adjusting the nozzle angle. To link units in series, connect them with 3/4 in or 1-inch water pipe to keep enough water volume reaching every head.

Comparison Table

Setup and Use

Place the sprinkler on flat, level lawn. Connect your garden hose to the base connector — use the shutoff valve to control flow, and the link port if you're adding a second unit in series. Open the tap to start it rotating. For a single unit, centre it in the area you're watering and let the rotation take care of the surrounding lawn. When linking several units, run 3/4 in or 1-inch pipe between them to keep water volume consistent at every head.

Care and Storage

After use, disconnect the hose and shake any standing water out of the nozzle ports before storage. Keep it somewhere dry, and bring it indoors or under cover during winter so extended freezing doesn't make the plastic brittle. If mineral deposits from hard water start affecting the spray, rinse the nozzle ports periodically to clear them.

Product Specifications

Package Includes

1 × Triple Nozzle Lawn Water Sprinkler