Setting up a cooler patio or a gentle watering line for the garden shouldn't mean piecing together a full irrigation system. This patio misting kit gives you a complete 20 m (65.6 ft) setup — adjustable misting nozzles, 8 mm hose, and push-fit connectors — that you can route along fences, garden beds, courtyards, greenhouses, or patio edges however your space calls for it. Built for outdoor cooling and light plant watering, it puts a fine mist exactly where you place it, with a layout that's easy to adjust.

Why It Stands Out

✓ Full 20 m (65.6 ft) Misting Line — enough hose to cover patios, garden beds, fence lines, courtyards, and more without sourcing separate parts.

✓ 20 Adjustable Brass Nozzles — rotate each one to switch between a fine atomized mist and a more direct stream, depending on the setup.

✓ Bendable, 360° Nozzle Arms — the 20 cm (7.87 in) arms shape and point toward plants, patio edges, or cooling zones for precise placement.

✓ Push-Fit Installation — the 8 mm hose and T-connectors go together with a simple cut-and-insert method, no plumbing skills needed.

✓ Built for Cooling and Watering — suited to courtyard cooling, garden and vegetable plant watering, greenhouse humidity, and patio misting in warm weather.

✓ Layout Adapts to Your Space — cut the hose and place nozzles wherever you need them instead of working around fixed spacing.

✓ Everything in One Kit — hose, nozzles, T-connectors, tap connector, clips, and pipe joints, ready to build a full misting line.

Where to Use It — Patios, Garden Beds, Greenhouses and Courtyards

This misting system suits any spot where you want a soft spread of water or a cooling mist. Run it along a patio edge for a refreshing mist, around a garden bed to help with watering, or near vegetable plants where targeted moisture keeps things comfortable on hot days.

It also works in courtyards, greenhouses, balcony gardens, fence lines, pergolas, outdoor seating areas, and plant rows. Since the nozzles move along the hose, it suits layouts that call for flexible spacing rather than a fixed sprinkler pattern.

How It Works — 8 mm Hose with Adjustable Brass Nozzles

An 8 mm hose line runs to multiple T-connectors and bendable misting nozzles. Water travels through the hose, reaches each connector, and exits through the adjustable brass nozzle tip as either a fine spray or a more direct stream, depending on how far you've rotated it.

The 20 cm (7.87 in) nozzle arms bend into place, so you can aim the mist toward plants, garden edges, or a cooling zone. To install, cut the hose wherever you want a nozzle and push it into the connector — the blue ring grips the hose once it's inserted.

Comparison Table

How to Use It — Planning, Cutting and Installing the Line

1. Plan your route — decide where the misting line will run, such as along a fence, garden bed, patio edge, or greenhouse frame.
2. Lay out the full 20 m (65.6 ft) hose before cutting, so you can plan nozzle positions first.
3. Cut the hose at each point where you want a nozzle connector.
4. Push the hose ends into the T-connector until they're seated securely in the push-fit openings.
5. Insert the bendable misting nozzle into the connector outlet.
6. Secure the line in place with the included clips or another suitable fixing point.
7. Connect the system to your outdoor tap using the supplied tap connector.
8. Turn on the water and rotate the brass nozzle tips to set the spray style and direction.

Tip: Test at low pressure first, then fine-tune nozzle direction and flow before leaving it running.

Care and Maintenance — Keeping the Line Clear

✓ Check the brass nozzle tips regularly and clear dirt or mineral buildup that changes the spray.

✓ Make sure the hose is fully seated in each push-fit connector before turning the water on.

✓ Inspect the line for loose fittings after repositioning any nozzles.

✓ Drain the hose before storing the system for an extended period.

✓ Bring the system in from harsh outdoor exposure during long stretches of non-use, to protect the hose, connectors, and nozzles.

Product Specifications

Package Includes

1 × 20 m (65.6 ft) hose line
20 × 20 cm (7.87 in) adjustable misting nozzles
20 × T-connectors
20 × clips
1 × tap connector
Assorted 8 mm pipe joints and end accessories